
Electrical Safety and Power Quality Audit in Mumbai
Cease Fire & Electrical Services LLP audits electrical installations in commercial buildings, factories, housing societies and institutions in Mumbai. We check panels, earthing, cabling and protection for safety risks, measure power quality with Fluke analysers and scan panels with FLIR and Testo thermal imagers, and give you a written report with prioritised recommendations. We are a Maharashtra licensed electrical contractor (Licence No. 17545), working since 1992.
What an electrical audit checks
- Main and distribution panels
- Condition, loose connections, overheating signs, labelling and clearances
- Earthing and protection
- Earth pits and continuity, MCB, MCCB, RCCB and ELCB selection and operation
- Cabling
- Sizing, routing, insulation damage, cable trays and fire-stopping at shafts
- Thermal scanning
- Hot spots in panels and connections using FLIR and Testo thermal imagers, by Level 1 certified thermographers
- Power quality
- Voltage, current, power factor and harmonics, logged with Fluke power analysers
- Power for fire systems
- Supply, changeover and cabling to fire pumps, fire alarm panels, emergency lighting and smoke fans
- Records
- Single-line diagrams, load details and maintenance records
Why get an electrical audit
Reduce fire risk
Electrical faults are a common cause of building fires. An audit finds hazards before they cause damage.
Protect equipment
Poor power quality and loose connections shorten the life of motors, drives, UPS and IT equipment.
Plan maintenance and upgrades
A prioritised report helps you budget for the most important fixes first.
Support fire and energy reviews
The findings fit with a fire safety audit or an energy audit of the same site.
Where electrical audits matter most
- Hospitals, where critical equipment and fire systems depend on a reliable supply.
- Data centres and electrical rooms, where heat, load and power quality are closely linked.
- Factories, where motors, drives and heavy loads stress panels and cabling.
- Offices, housing societies and schools, where older wiring and added loads build up over the years.
How our electrical audit works
Brief and documents
We agree the areas and systems to cover and collect single-line diagrams and maintenance records.
Site inspection
Our engineers inspect panels, earthing, cabling and protection devices, with your electrical team.
Measurements
Thermal scanning and power quality logging are carried out where included in the scope.
Audit report
You receive a written report with observations, photos and recommendations ranked by priority.
Corrective work, if you want it
Our electrical team can quote for the recommended repairs. You are free to use any contractor.
What you get in the report
- The areas, panels and systems inspected
- Observations with photos and, where measured, thermal and power quality readings
- Recommendations ranked high, medium or low priority
- Missing or outdated drawings and records to update
Why choose Cease Fire for your electrical audit
Licensed electrical contractor
Maharashtra Electrical Contractor Licence No. 17545, and a Class-I electrical licence holder on the audit team. All instruments are calibrated every year at NABL-accredited labs.
Since 1992
1,500+ projects and 250+ audit assignments across fire and electrical safety. Empanelled with BEE, NSIC, the National Safety Council and MSME, and supported by experts from IIT and IIM.
Fire and electrical in one team
We understand how electrical faults turn into fire risk. We also carry out arc flash studies.
Clients
Including BPCL, BSNL, MTNL, Honeywell, TCS, CPWD and PWD. See our certifications.
After the audit: keep watching the fire-pump power
An audit is a snapshot. For the fire pump control panel, our FireSense IoT monitoring can track energy, current, voltage and frequency continuously, with an SMS alert if data stops for 15 minutes. It also supports the Automated Continuous Monitoring System (ACMS) required for covered buildings in Maharashtra since 12 June 2025.
Book an electrical audit
Tell us your facility type, location and connected load. We'll confirm the scope and send an audit proposal.
Frequently asked questions
What is an electrical safety audit?
It is a structured inspection of a building's electrical installation to find safety hazards, such as poor earthing, overloaded circuits or damaged cables. It ends with a written report and recommendations.
What is a power quality audit?
A power quality audit measures voltage, current, power factor and harmonics over a period, using a power quality analyser. It shows whether poor power quality is affecting equipment or energy use.
How often should a building have an electrical audit?
It depends on the building's age, load and use. Older installations, high-load facilities and buildings with past faults should be audited more often. Ask us to suggest a frequency for your site.
Will the audit need a power shutdown?
Most checks are done with the system live and safely guarded. Any work that needs a shutdown is planned with your team in advance.
Does the audit check the power supply to fire systems?
Yes, if you include it. We check the supply, changeover and cabling to fire pumps, fire alarm panels and emergency lighting, because these must keep working during a fire.
Does the audit include repairs?
No. The audit identifies problems and recommends actions. Repairs can be quoted separately.
Is an electrical audit a statutory certificate?
No. It is an independent technical review of your installation, not an approval from an authority.
What documents should we share before the audit?
Single-line diagrams, panel schedules, load details, previous audit reports and maintenance records, if available.
How do we book an electrical audit?
Call +91 9920676281, email sales@ceasefireservices.com or use the enquiry form with your facility type and location.
Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.
Call +91 9920676281






