Pressure Switch for Fire Suppression Systems in Mumbai

Cease Fire & Electrical Services LLP supplies INTIME auto-reset pressure switches (SPDT) for fire suppression systems in Mumbai. The switch senses the pressure in a detection tube or cylinder line and signals your alarm or control panel when it changes, for example when the detection tube ruptures or the system discharges. We supply it with tube suppression, electrical panel protection and clean agent kits, or separately as a spare.
What it does in a suppression system
In a tube-based system, the detection tube holds pressure until it ruptures in a fire. The pressure switch is fitted into that line. When the pressure drops or the system discharges, its contacts change and tell the panel. The panel can then sound an alarm, shut down equipment or signal other systems. See fire detection tube.
Specification
- Product
- INTIME auto-reset pressure switch (SPDT), model 20PS-10/18
- Operating pressure
- 10 ±1 bar and 18 ±1 bar
- Electrical rating
- 240 VAC on both contact pairs
- Cycle life
- 20,000 operations minimum
- Proof pressure
- 35 bar
- Burst pressure
- 45 bar
- Ambient temperature
- -30 °C to +70 °C
- Fluid temperature
- -54 °C to +135 °C
- Pressure connection
- R1/8
- Connection
- Wired lead for the panel
Where it is used
- Tube suppression systems for enclosed equipment. See tube suppression.
- Electrical panel protection, signalling discharge to the alarm panel. See electrical panel protection.
- INTIME FK-5-1-12 clean agent and kitchen kits. See kitchen wet chemical suppression.
Choosing and fitting
- Confirm the pressure at which your system should signal, and match it to the switch's operating pressures.
- Check the voltage and current of the circuit it will switch, against the 240 VAC rating.
- Fit it on the correct port, and wire it to the panel input that handles alarms or shutdowns.
- Test it after fitting and at each AMC visit.
Why choose Cease Fire
Since 1992
1,500+ fire protection projects and the Rashtriya Nirman Ratna Award for Best Government Contractor (2002).
Licensed
Maharashtra Fire Services Licensed Agency (MFS/
LA/ ). See our certifications.RF-93/ RD-95 System knowledge
We design and install suppression systems, so we match each part to the system it serves.
Request a quote
Tell us the system, the quantity and the pressure at which you need it to signal. We will confirm the part and send a quote.
Frequently asked questions
What does a pressure switch do in a fire suppression system?
It senses a change in pressure and changes its contacts to signal a control or alarm panel. For example, it can show that the detection tube has ruptured or that the cylinder has discharged.
What are the operating pressures?
This switch operates at 10 ±1 bar and 18 ±1 bar, as per the datasheet for the INTIME 20PS-10/18 model.
What does auto-reset mean?
The switch returns to its normal state by itself once the pressure goes back, so it needs no manual resetting.
What are the electrical ratings?
It is a single-pole double-throw (SPDT) switch rated 240 VAC on both contact pairs, with a minimum cycle life of 20,000 operations. Please check the datasheet for the exact model.
What are the pressure and temperature limits?
Proof pressure is 35 bar and burst pressure is 45 bar. Ambient temperature range is -30 °C to +70 °C and fluid temperature range is -54 °C to +135 °C.
What is the connection size?
The pressure port is R1/8. The switch has a wired lead for connection to the panel.
Which systems is it used with?
It is used with INTIME FK-5-1-12 clean agent kits, tube suppression and panel protection systems, to signal the alarm or shutdown panel. Ask us which model suits your system.
Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.
Call +91 9920676281





