Auditor scanning an open electrical panel with a thermal camera while a colleague notes readings

Electrical Panel Fire Suppression System in Mumbai

Cease Fire & Electrical Services LLP designs and installs electrical panel fire suppression for switchboards, MCC and PCC panels, PLC and control cabinets, UPS and battery rooms in factories, commercial buildings and utility sites in Mumbai. Panel fires start inside closed cabinets, often from a loose connection or overheating, and can grow unseen before a room detector notices them. We protect the panel itself, the room it sits in, or both, and as licensed electrical contractors we understand where the risk starts.

Why panel fires need special protection

  • They start inside

    A hot joint or failing component can burn inside a closed cabinet before smoke reaches a ceiling detector.

  • Water is not an option

    Live equipment needs a non-conductive agent.

  • Downtime is costly

    One panel fire can stop a whole plant, building or substation.

  • Fire spreads along cables

    A panel fire can travel through cable trays into other rooms.

Three ways to protect panels

  1. Tube-based system inside each panel

    A heat-sensitive tube runs through the cabinet and bursts at the fire, releasing agent inside the panel

    Individual panels, MCCs, PLC cabinets and server racks

  2. Modular automatic extinguishers

    Self-contained units above or inside the panel release agent when their bulb breaks in the heat

    Small panel rooms, DB and meter rooms

  3. Room flooding

    The whole electrical room is filled with CO2 (unoccupied rooms), a clean agent or an inert gas

    Large switchgear, UPS and battery rooms

Many sites use two layers: tube systems inside critical panels, and room flooding for the whole electrical room. We recommend the right mix after the survey.

Where panel protection is used

  • Main LT panels, PCC and MCC panels in factories and buildings
  • PLC, DCS and control cabinets
  • UPS rooms and battery rooms
  • Substations, transformer rooms and switchgear rooms
  • Lift machine rooms and DG control panels
  • Server racks and telecom cabinets

Prevention as well as suppression

Suppression stops a fire, but finding the hot joint first is better. Our electrical audit team includes Level 1 thermographers who use FLIR, Testo and Fluke instruments, calibrated yearly at NABL labs, to find overheating connections in panels before they fail. We can combine a thermography survey with a panel protection design.

Ready-made cabinet kits

For single cabinets we supply Honeywell ECS electrical cabinet kits (ECS-250, ECS-500 and ECS-1000), filled with the clean agent FK-5-1-12. These are direct low-pressure systems: the cylinder is held at 13.5 to 16 bar and a heat detection tube rated 110 °C or 180 °C runs through the cabinet. The kits are designed to NFPA 2001, and we pick the size from the cabinet volume.

Design standards

We design each system to the NFPA standard that applies to its agent and to UL/FM requirements where the project calls for them. For tube systems we follow the maker's listed design for the cabinet volume; for room flooding we prepare a design sheet for every room showing the volume, agent quantity and nozzle layout.

Our process

  1. Free site survey

    We list the panels, measure the cabinets and rooms, and note what is critical to your operation.

  2. Design

    Protection option for each panel or room, agent choice and quantity, and detection.

  3. Supply and installation

    Tube systems, modular units or room flooding, installed by our own team with the least possible shutdown time.

  4. Testing and commissioning

    Detection and pressure checked, signals to the fire alarm tested, and staff trained.

  5. Form A

    As a licensed agency, we issue Form A for the work, which you submit to the fire brigade.

  6. AMC and Form B

    Periodic checks of pressure gauges and agent, and Form B every January and July.

Electrical and utility experience

  • Engineer in a hard hat testing an open red fire alarm control panel with a handheld meter, a call point on the wall beside it

    Adani Electricity Mumbai

    Addressable fire alarm systems at 65 receiving substations across Mumbai, May 2024 to January 2026.

  • Licences

    Maharashtra Fire Services Licensed Agency (MFS/LA/RF-93/RD-95) and Maharashtra Electrical Contractor Licence No. 17545.

  • Industrial clients

    Including BPCL, Roquette India and Adani Electricity Mumbai.

See all projects and case studies

Maintenance and Form B

Under AMC we check each tube system's pressure gauge, the modular units and room flooding cylinders, detectors and signals to the fire alarm, and we tell you when a new or modified panel needs protecting. A licensed agency must inspect the fire systems and issue Form B every January and July, and we can include this in your AMC.

Why choose Cease Fire

  • Since 1992

    1,500+ projects and the Rashtriya Nirman Ratna Award for Best Government Contractor (2002).

  • Fire and electrical in one team

    Licensed fire agency and licensed electrical contractor.

  • Prevention too

    Thermography by Level 1 thermographers to find hot joints early.

  • Every option

    Tube systems, modular units and room flooding, chosen panel by panel.

Book a free site survey

Send a list of your panels and electrical rooms, or book a visit. We will recommend the right protection for each and send a clear proposal.

Frequently asked questions

What is an electrical panel fire suppression system?

It is a system that detects and puts out a fire inside an electrical panel or electrical room using a non-conductive agent. It can protect each panel from the inside, the whole room, or both.

Why not use sprinklers for electrical panels?

Water conducts electricity and damages equipment. Panel systems use gases or agents that are safe on live equipment and leave little or no residue.

How does a tube-based panel system work?

A heat-sensitive tube runs through the cabinet. In a fire it bursts at the hottest point and releases agent inside the panel, often before a room detector would notice the fire.

Which panels should be protected?

Main LT panels, MCCs, PCCs, PLC cabinets, UPS and battery panels, and any panel whose failure would stop your operation. We help you decide during the survey.

Can a panel system be connected to the fire alarm?

Yes. Pressure switches on the system can signal the fire alarm panel when it operates, so staff know which panel was affected.

Can you check our panels for overheating as well?

Yes. Our Level 1 thermographers carry out thermography surveys to find hot joints before they cause a fire.

How often should panel suppression systems be checked?

Most sites have quarterly checks and an annual service under AMC, including pressure gauges and agent. A licensed agency must also inspect the fire systems for Form B every January and July.

What is an ECS electrical cabinet kit?

It is a ready-made tube system for one cabinet. A heat detection tube bursts at the fire and releases FK-5-1-12 inside the panel, without needing electrical power to work.

Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.

Call +91 9920676281