Emergency Exit Lights and Lighting Signage in Mumbai

Cease Fire & Electrical Services LLP supplies and installs emergency exit lights and emergency lighting signage in Mumbai for residential towers, offices, factories, hospitals and public buildings. An emergency exit light is an LED exit sign with its own battery that stays lit when the mains power fails, so people can find the way out. As a licensed fire agency and electrical contractor, we plan, wire and test the lights ourselves.
What the National Building Code asks for
The National Building Code of India 2016 (Part 4) sets these requirements for exit signs and emergency lighting:
- Exit signs
- At all exits, emergency exits and escape routes
- Backup duration
- Emergency lighting must hold the required light level for at least 90 minutes after mains failure
- Changeover
- Must come on within 5 seconds of the normal lighting failing
- Mounting height
- Luminaires at least 2 m above floor level
- Floor lighting
- At least 10 lux on the centre line of escape routes
Your fire authority or consultant may add requirements for your building type. We follow the approved fire drawings.
Types of emergency lighting
Illuminated exit sign
What it doesLED "EXIT" or running-man sign with battery backup
Where it is usedExit doors, staircase entries, corridor turns
Directional exit sign
What it doesExit sign with an arrow showing the escape direction
Where it is usedCorridors, lobbies, large floors
Emergency escape light
What it doesBattery-backed light that lights the floor of the escape route
Where it is usedStaircases, corridors, basements
Maintained fitting
What it doesStays lit all the time and continues on battery when power fails
Where it is usedCinemas, malls, hospitals, spaces used at night
Non-maintained fitting
What it doesLights up only when the power fails
Where it is usedOffices, factories, residential staircases
For signs that glow without power or wiring, see our emergency exit sign boards.
Where emergency exit lights are needed
- Staircases, lift lobbies and refuge areas in high-rise residential towers
- Corridors and exits in offices, malls and hospitals
- Factory floors, warehouses and basements
- Schools, auditoriums and hotels
Supply, installation and testing
We review your floor plans or walk the site, mark where each light and sign goes, and supply fittings to suit: single- and double-sided exit signs, maintained and non-maintained fittings, and self-contained or central battery systems. Our electrical team wires them to the correct circuit and tests that each one switches on when power is cut. Batteries lose capacity over time, so we check the lights during AMC visits and replace failed units.

Why choose Cease Fire
Fire and electrical together
Licensed fire agency since 1992 (MFS/
LA/ ) and Maharashtra Electrical Contractor (Licence No. 17545).RF-93/ RD-95 Planned, not just supplied
Positions follow your escape routes and fire drawings.
One team
Signage, emergency lighting, fire alarm and fire fighting systems.
Request a quote
Share your floor plans, building type and number of floors, or a list of the lights you need. We will prepare a layout and quote.
Frequently asked questions
What is an emergency exit light?
It is an illuminated exit sign with a built-in battery. When the mains power fails, it stays lit so people can see the way out.
How long must emergency lighting last in India?
The National Building Code 2016 asks for emergency lighting that holds the required light level for at least 90 minutes after power fails. It must come on within 5 seconds.
What is the difference between maintained and non-maintained emergency lights?
A maintained light is on all the time and continues on battery during a power cut. A non-maintained light stays off and switches on only when the power fails.
Are emergency exit lights mandatory?
The NBC requires exit signs at all exits and escape routes, and emergency lighting for escape routes. Whether signs must be illuminated depends on the building type and your fire authority's approval.
What is the difference between an exit light and a glow-in-the-dark exit sign?
An exit light uses LEDs and a battery and is brighter. A photoluminescent sign needs no power and glows after absorbing light. Many buildings use both.
At what height should exit lights be installed?
The NBC asks for emergency luminaires at least 2 m above floor level. We fix exit signs above doors and at corridor turns so they are visible along the route.
Do you supply central battery emergency lighting?
Yes. We supply self-contained fittings with their own batteries and central battery systems that feed many fittings from one unit. Our licensed electricians wire, install and test both.
Do you test emergency lights during AMC visits?
Yes. We check that each light and sign switches on when power is cut, and we replace failed batteries or units.
Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.
Call +91 9920676281






