Butterfly Valve for Fire Fighting in Mumbai

Cease Fire & Electrical Services LLP supplies the butterfly valve for fire fighting pipework in Mumbai, in 40 mm to 300 mm sizes rated PN 1.6, 2.0 and 2.5 MPa. A butterfly valve shuts off a line with a quarter turn of its lever, so it is used on pump headers, risers, ring mains and sprinkler feeds where space is tight. We supply, install and maintain these valves as part of hydrant, sprinkler and pump room work for buildings, factories and campuses.
Specifications
- Sizes
- 40, 50, 65, 80, 100, 125, 150, 200, 250 and 300 mm (1½ to 12 inch)
- Pressure rating
- PN 1.6, 2.0 and 2.5 MPa
- Standard
- IS 13095
- Body
- Cast iron to IS 210 FG 200
- Disc
- SG iron (ASTM A536) or stainless steel
- Liner
- Moulded EPDM
- Bush
- PTFE
- Operation
- Lever with lock plate, quarter turn
- Hydrostatic test
- Body 2.4 MPa, seat 1.6 MPa
If your specification calls for a gear operator, a supervisory (tamper) switch or a UL listed / FM approved valve, tell us and we will confirm what we can supply.
Where butterfly valves are used in fire systems
- Pump room: isolation on the suction and delivery of each fire pump, so one pump can be serviced while the others stay ready.
- Risers and ring mains: sectional isolation, so part of the system can be shut for repair while the rest stays live.
- Sprinkler installations: the main stop valve ahead of each installation valve.
Butterfly valve or gate valve?
Operation
Butterfly valveQuarter turn of a lever
Gate valveSeveral turns of a handwheel
Space
Butterfly valveShort, light body
Gate valveLonger, taller body
Flow when open
Butterfly valveDisc stays in the flow, so there is some pressure loss
Gate valveFull bore, very low pressure loss
Sizes we supply
Butterfly valve40 to 300 mm
Gate valve50 to 300 mm
Both are isolation valves and should be left fully open or fully closed, not used to throttle flow.
Supply, installation and servicing
We supply butterfly valves on their own or as part of a pump room or hydrant package. On our projects we install and pressure-test them with the rest of the system. During AMC visits we operate each isolation valve, check that it is left fully open, look for leaks at the stem and flanges, and replace valves that have seized.

Why choose Cease Fire
Since 1992
A Maharashtra Fire Services Licensed Agency (MFS/
LA/ ) with 1,500+ projects.RF-93/ RD-95 Right valve for the position
We design, install and maintain fire systems, so we check size, rating and connection against your drawing.
One supplier
Valves, fire pumps, hydrant accessories and installation from one team.
Request a valve quote
Send your BOQ or valve list with sizes, pressure rating and quantity. We will confirm the specification and quote.
Frequently asked questions
What is a butterfly valve used for in a fire fighting system?
It isolates a section of pipework, such as a pump's suction or delivery, a riser or part of a ring main. It opens and closes with a quarter turn, so it is quick to operate.
What sizes and pressure ratings do you supply?
We supply butterfly valves from 40 mm to 300 mm, rated PN 1.6, 2.0 and 2.5 MPa. Each valve is hydrostatically tested at 2.4 MPa on the body and 1.6 MPa on the seat.
What is the butterfly valve made of?
The body is cast iron to IS 210 FG 200 with a moulded EPDM liner. The disc is SG iron or stainless steel.
Is a butterfly valve better than a gate valve on a fire line?
Neither is better in every case. A butterfly valve is lighter and quicker to operate, while a gate valve gives a full-bore opening with less pressure loss. The choice depends on space, size and your consultant's specification.
Why must fire system butterfly valves stay open?
A closed isolation valve can cut water to hydrants or sprinklers without anyone noticing. We check valve positions during AMC visits, and some specifications also call for a supervisory switch that signals the fire alarm panel if a valve is closed.
Can you supply UL listed or FM approved butterfly valves?
Yes. UL listed and FM approved valves are available. Tell us what your consultant or insurer specifies, and we will share the manufacturer's certificate for the exact model with our quote.
Can you replace a seized butterfly valve in an existing system?
Yes. We check size, rating and connection against your drawing, supply a matching valve and fit it when the line can be isolated.
Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.
Call +91 9920676281







