Push Type Manual Call Point in Mumbai

Two red push-type manual call points with clear flip covers, on a concrete wall

Cease Fire & Electrical Services LLP supplies, installs and maintains the push type manual call point for fire alarm systems in Mumbai, for offices, housing societies, hotels, kitchens, schools and factories. A push type call point raises the fire alarm when its plastic element is pressed firmly, and it is reset with a key afterwards, so there is no glass to break or replace. We supply conventional and addressable versions to suit your panel and fix them near exits and staircases where people will look for them.

How a push type call point works

Pressing the resettable element operates a switch inside the call point, which signals the fire alarm panel. Most models show a flag or light so it is clear which call point was used, and the alarm stays on at the panel. After the fire or test, the call point is opened and reset with its key, ready for use again.

Push type or break glass

  1. How it operates

    Press the plastic element firmly

    Break the glass element

  2. After use

    Reset with a key; nothing to replace

    Replace the glass, then reset

  3. Testing during AMC

    Quick to test and reset

    Glass or a test key needed

  4. Food preparation areas

    Preferred, as there is no broken glass

    Better avoided

Both types work the same way for the person raising the alarm. Use one type throughout a building so every call point looks familiar.

Where push type call points suit

  • Kitchens, canteens and food preparation areas, where broken glass must be avoided
  • Buildings with frequent testing, where resetting with a key saves time
  • Public areas where accidental presses are a risk, fitted with a hinged protective cover
  • UK guidance on BS EN 54-11 notes that a hinged protective cover can be added to a single-action call point to reduce accidental use.

Where call points are fixed

Maximum travel distance to the nearest call point
30 m inside the building; 45 m where call points are outside
Mounting height
1.4 m above the floor
Preferred position
Near the entry to staircases on each floor
Position
Easy to reach, well lit, clearly visible and free of obstructions
Enclosure
Dust and moisture proof

Supply, installation and servicing

We supply call points with their back boxes and reset keys, fix them at the correct height and position, wire them to the panel and test each one before handover. Under our AMC, call points are operated, reset and checked during quarterly visits and the annual service.

Call point operation and panel status can also be reported through FireSense IoT monitoring, which supports the ACMS now required for covered buildings in Maharashtra.

Engineer testing a fire alarm call point in a school corridor

Why choose Cease Fire

  • Since 1992

    A Maharashtra Fire Services Licensed Agency (MFS/LA/RF-93/RD-95) that designs, installs and maintains fire alarm systems.

  • Proven on fire alarm work

    Addressable fire alarm systems at 65 Adani Electricity substations in Mumbai.

  • Right part first time

    We confirm panel compatibility before you order replacement call points.

Request a quote

Tell us the number of call points, the number of floors, whether you need protective covers, and your panel make and model if you are adding or replacing call points. We will confirm the right type and send a quote.

Frequently asked questions

What is a push type manual call point?

It is a red wall-mounted device that raises the fire alarm when its plastic element is pressed firmly. It is reset with a key, so there is no glass to replace.

How do you reset a push type manual call point?

Insert the reset key, which returns the element to its normal position, then reset the alarm at the fire alarm panel. Only trained staff or your maintenance team should do this.

Is a push type call point better than a break glass call point?

It is quicker to reset and has no glass to replace, so it suits kitchens, food areas and buildings with frequent testing. Both types raise the alarm the same way.

How can I stop people pressing the call point by accident?

Fit a hinged protective cover over the call point. The cover is lifted before pressing, which cuts accidental activation without hiding the call point.

At what height should a push type manual call point be installed?

IS 2189 says call points should be fixed 1.4 m above the floor, and nobody should have to travel more than 30 m inside the building to reach one.

Will a push type call point work with my existing fire alarm panel?

It will if it matches your panel's make and protocol, especially on addressable systems. Share the panel model and we will confirm a compatible call point.

Are manual call points covered by ACMS monitoring?

Yes. The Maharashtra ACMS covers fire alarm panel, detection and manual call point status, and our FireSense IoT panel reports these to the owner and to us.

Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.

Call +91 9920676281